Manual
7
4.2
Front and rear
1
Current sensing clamp
2
Lever to open clamp
3
Dial for function selection
4
PEAK key
5
Backlight key
6
HOLD key
7
LC display
8
COM input terminal
9
Positive input terminal
10
Battery compartment
4.3
Key functions
4.3.1
HOLD function
You can freeze the current value in the display by pressing the HOLD key. To deactivate this function,
press the HOLD key once again.
4.3.2
PEAK function
When you press the PEAK key, the PEAK icon will appear in the display. The highest value will be
displayed and frozen in the display. This value is updated anytime a higher value is measured. To return
to normal mode, press the PEAK key again.
4.3.3
Zero function
When you press and hold the PEAK key for at least 2 seconds, the
icon will be shown. This means
that the zero function is activated, i. e. that the reading is reset to zero. To return to normal mode, press
the PEAK key again.
4.3.4
Backlight function
You can turn on the backlight function by pressing the
key. The backlight is a yellow light which will
shine for 15 seconds when activated. To turn off this function, press the
key again.
