© PCE Instruments
7
10 Data group
With this coating thickness gauge, the measured values are saved automatically. Various data
groups are available for this purpose. To make settings to the data memory, go to the menu under
the item "Data Group". Here, you can make the following settings:
Course (History)
Here you can view the last measured values
belonging to the set measuring group.
Selected group (Select Grp XXX)
Here you set the current measuring group.
If you make settings in the menu item "Data
group", these always refer to the data group
selected here. The measured values are also
saved in the data group selected here.
Delete last value (Remove latest)
With this function, you can delete the last
measured value.
Delete group (Erase group)
The entire measuring group is deleted here.
Erase memory completely (Erase all)
Here, you can clear the entire memory.
11 Limit value alarm
To set limit values, first go to the "limit alarm" menu. Under the item "Alarm on", you can activate
the limit alarm function. You can set the limits as follows:
Upper limit value (Up limit)
Here, you can set the upper limit value.
Lower limit value (Low limit)
Here, you can set the lower limit value.
If the measured value is within the limit range, the LED indicator briefly flashes in green. If the
measured value is outside the limit values, the LED indicator briefly flashes in red. The display
shows whether the current measured value is too high or too low.
12 Convert unit
To change the unit, go to the menu. Under the item "Unit", you can choose between the units µm
and millimetre.
13 Backlight
The backlight switches on and off automatically. It is not possible to adjust this.
14 Software
The data from the coating thickness gauge can also be exported. For this purpose, there is the
possibility of Bluetooth transfer to an Android or iOS device. It is also possible to transfer the data
to a PC via the micro USB interface.
