Manual
12
5.3.4
Tolerances
To set up or adjust tolerances, press the Menu button
, select “Tolerance“ and press Enter
. Now,
you get to the tolerance display.
Here you can activate / deactivate different tolerances. To do so, select the desired option by using the
arrow keys (
and
) and press Enter
. If you activate a tolerance, you get to an input display where
you can set the desired threshold value. Use the arrow keys (
and
) to select a number. Press Enter
to get to the next digit. After confirming the last digit by pressing Enter
, the tolerance is set up.
Note: The threshold value refers
to the „ΔE*“ value in the sample measurement display. It specifies the
maximum acceptable value of the deviation. If the measured value exceeds the threshold value, you can
see a “Fail” indication in the display. Otherwise, the display will show “Pass”.
5.3.5
Delete recorded data
To delete the recorded data, press the Menu button
, select “Delete“ and press Enter
. Now, you get
to the delete display.
Here you have two different options. You can either
delete all sample measurements (“Delete ALL
Samples”) or all records (“Delete ALL Records”).
Select the desired option by using the arrow keys (
and
) and press Enter
. A confirmation display
appears. Press Enter
to confirm or Back
to cancel.
Note: If you delete all records, all sample measurements will be deleted as well.
5.3.6
Averaging
You can set the number of measurements which are performed during the measuring procedure. From
these particular measurement results, the average value is generated.
To get to the averaging settings, press the Menu button
, select “Average“ and press Enter
.
Here, you can set the number of measurements. Use the arrow keys to select a number. Press Enter
to get to the next digit. After confirming the last digit by pressing Enter
, the averaging is set.
Note: If you set “00” or “01”, there will be no averaging.
