6
MIN./MAX. FUNCTION
1. Press and hold
button until (MIN) appears on display. (See Fig. G) Display is
now showing minimum humidity and temperature readings in memory.
2. Press and hold
button again until (MAX) appears on display. (See Fig.H).
Display is now showing maximum humidity and temperature readings in memory.
3. To return to current temperature and humidity readings press and hold MN/MX or
button until Min or Max disappear from display.
4. Press
RESET
or
button more than two seconds to clear current reading from
memory.
WARNING:
While checking MIN/MAX value for EX, T2,
and , don’t replace probe
otherwise you will get error code displayed.
If you don’t plug the probe into socket before turning the meter on, the error code will also
appear when you check MIN/MAX value.
Note:
Remenber Low Batteries will tend to give inaccurate readings, so make sure you have
enough power.
&
These functions are only for PCE-310.
is calculated by subtracting the T2 (Ex.temp.) from T1 (Air temp.)
is calculated by subtracting the DP (dewpoint) from T2 (Ex. Temp.)
(1) Press
button until appears on display. (See Fig.J)
(2) Press
button until appears on display. (See Fig.K)
