© PCE Instruments
8
6.7.1
Format SD card
•
Navigate to the advanced settings as described above.
The prompt Sd F appears on the display.
•
Use the
"▼ / Power" or "▲ / Time" keys to select yes or no.
•
Confirm the selection with the "LOG / Enter" key.
•
If you select "yes", you must confirm the security query again by pressing the "LOG /
Enter" key.
•
Press the "SET" key repeatedly until you return to measuring mode or wait for 5
seconds; then the meter will switch to measuring mode automatically.
Attention!
If you select "yes" and confirm the security query, all data on the SD card will be deleted and the
SD card will be reformatted.
6.7.2
Date / time
•
Navigate to the advanced settings as described above.
•
Press the "SET" key repeatedly until "dAtE" appears on the display.
After a short time, the year, month and day appear on the display.
•
Use the
"▼ / Power" or "▲ / Time" keys to select the current year and confirm the
entry with the "LOG / Enter" key.
•
Proceed with the entry of the month and the day as with the entry of the year. After
confirming the day, the hour, minute and second will appear on the display.
•
Proceed with these entries as with the year, etc.
•
Press the "SET" key repeatedly until you return to measuring mode or wait for 5
seconds; then the meter will switch to measuring mode automatically.
6.7.3
Sampling time / log interval
•
Navigate to the advanced settings as described above.
•
Press the "SET" key repeatedly until "SP-t" appears on the display.
•
Select the desired log
interval with the "▼ / Power" or "▲ / Time" keys and confirm
the entry with the "LOG / Enter" key. The following can be selected: 1, 2, 5, 10, 30,
60, 120, 300, 600 s and auto.
•
Press the "SET" key repeatedly until you return to measuring mode or wait for 5
seconds; then the meter will switch to measuring mode automatically.
Attention!
"auto" means that each time the measured values are changed (>±10 digit), the values are
saved once.
If the setting is 1 second, individual data records may be lost.
