© PCE Instruments
9
6.3
Energy saving
To save energy, you can set a time after which the display backlight or the device itself switches
off automatically. When you are in the
main menu, use the up and down keys to select “Settings”
and confirm with the MEAS/ENTER key. Then select “MeterSetup” with the arrow keys and
confirm with MEAS/ENTER again get to the respective submenus.
These submenus SreenOff and PowerOff can be opened with the MEAS/ENTER key. Changes
can be made by using the up and down keys and confirmed with MEAS/ENTER.
The following can be selected:
SreenOff:
1 … 99 seconds
PowerOff: Off (No), 10, 20, 30 minutes
6.4
Set number of measurements for average calculation
In
the “Settings” menu, select “MeasSetup” with the up and down keys and confirm with
MEAS/ENTER. Go to the menu item “AverTime” by using the up and down keys and press
MEAS/ENTER. Now set the desired number of measurements you want to be included in the
average calculation with the up and down keys and confirm with MEAS/ENTER.
6.5
Set tolerance
In the “Settings” menu, select “MeasSetup” with the up and down keys and confirm with
MEAS/ENTER. Go to the menu item “DeSeting” by using the up and down keys and press
MEAS/ENTER. Now set the desired tolerance with the up and down keys and confirm with
MEAS/ENTER. A tolerance of 1.0 is preset.
6.6
Set colour formula
In the “Settings” menu, select “MeasSetup” with the up and down keys and confirm with
MEAS/ENTER. Go t
o the menu item “Delta-E” with the down key and press MEAS/ENTER. Now
select the desired colour formula (CIE76 or CIE94) by using the up and down keys and confirm
with MEAS/ENTER.
