Address:East Room 306,3th Floor,1st Building,Shenhua Industrial Park,Meihua Road, Futian District,Shenzhen City
Tel:0755-32978297
Email:[email protected]
Manual
8.3
Decimal point
The decimal point can be formatted as “point” or “comma”, since the standard for the decimal point
varies between the two symbols. While in many parts of the world, the decimal point is a point (e.g.
45.34), in Europe it is often a comma (e.g. 45,34). Thus the display indicates “USA” for setting a
“point” as a decimal point and “Euro” stands for a “comma” set as the decimal point.
1. When the display indicates “dEC” you can select with the ▲- and ▼- button between “USA”
(for the point) and “Euro” (for the comma)
2. Confirm and save with the “Enter”- button.
8.4
Auto-Power-Off function
1. When the display indicates “PoFF”, you can chose between “yes “ and “no” by pressing the
▼- and ▲- button. “yes” means the Auto-Power-Off function is on and “no” means that it is
switched off.
2. Confirm and save with the “Enter”- button.
8.5
Beep tone on / off
1. When the display indicates “bEEP”, you can chose between “yes “ and “no” by pressing the ▼-
and ▲- button. “yes” means the beep tone is on and every time a value is saved, the device gives
an acoustic signal. “no” means the beep tone is turned off.
2.
Confirm and save by pressing the “Enter” button.
8.6
Select temperature unit °C or F
1.
When the display indicates “t-CF”, you can chose between “°C “ and “F” by pressing the ▼-and
▲- button.
2. After selecting the temperature unit, press the “Enter”- button and the settings will be saved.
8.7
Select the recording interval
1.
When the display indicates “SP-t” you can select with the ▼- and ▲- button the recording
interval in steps of 0, 1, 2, 5, 10, 30, 60, 120, 300, 600, 1800 and 3600 seconds. “0” stands
for a manual data logging.
2.
Confirm and save by pressing the “Enter” button.
8.8
Format SD memory card
1.
When the display indicates “Sd F” you can select with the ▼- and ▲- button between “yes” or
“no”, whilst “yes” stands for formatting the SD memory card.
2.
Confirm with the “Enter” key. If you confirm the option “yes” with the “Enter”- button, the
display will the indicate “yES Ent”. If you confirm again by pressing “Enter”, the SD memory
card will be formatted.
Caution
: By selecting formatting the whole data on the memory SD card will be erased
permanently.
9. Adapter
The device supports operating on batteries as well as via a 9 V DC adapter. Please use therefore the
9 V- input. If the device is operated via adapter, it will be switched on permanently. Thus the Power-
button will be without any function.
10
