Manual
5
4.3 Operation
During operation, Power is the main button used to return or stop, unless there is something else on the
screen. OK is to confirm the operations.
Menu and functions:
[Sampling]:
Surface for entering the parameter settings; in order to enter parameters for new
components and start the recordings.
[View Data]
Review or deletion of the tested data.
[Setting]
Functions and system settings
[Communication] Only if you have selected this, you can connect the tester to the computer.
[Shut down]
Turns off the device with the software. Manually it works with the Power button.
4.3.1 Measurement instructions
Select
the main menu
[
sampling]
and press OK
to open a window
[
parameter]
to set
the next test
components. The components number is created by the device automatically
.
The following settings are
possible
:
•
Pump
marking
(“pumping marker”)
:
Select
with
the left or right
arrow key.
When
you have pumping
concrete
,
select "Yes
".
• Measuring
curve
("
curve"): Set
a suitable curve
.
•
Carbonation depth
:
set a
carbonation depth.
Press Power to enter the options menu. There are various options:
• [sampling]: when you are in the Options menu, then select "Sampling" and press OK.
