© PCE Instruments
3
5
Device description
1.
BNC socket
– to measure cable length
via Coax option
2.
RJ45 socket - to measure cable length
via network option
3.
LCD
4.
OK / measuring key
5.
Coax-netzwork switch key
6.
Set key
7.
key (up / increase value)
8.
key (down / decrease value)
9.
key (On/off / in menu: back)
6
Operation
6.1
Preparation / inserting the batteries
To run the cable length meter, the included batteries must be inserted first. To do so, turn around
the meter and open the battery compartment cover at the rear side. Insert the batteries as marked
in the battery compartment. Then close the battery compartment cover.
Note
:
Replace the batteries as soon as the battery icon in the display glows in red. Only use 1.5 V AA
Alkaline batteries. If you will not use the cable fault tester for a longer period of time, remove the
batteries.
