Working with control panel
15/29
4.4. Entering corrections and parameters
The system of online moisture control allows adjusting scaling parameers of cur-
rent loop outputs and applying individual correction and averaging coefficients for
each sensor.
Press
button to enter “Settings” menu. The display will show pass-
word enter screen. Press symbol * on the display to see keypad for entering pass-
word (fig. 14). Enter “315” as the password using the keyboard and press
but-
ton. “Settings” menu is shown in fig. 15.
fig 14. Password screen
fig 15. “Settings” screen
Correction parameters can be selected for each sensor individually. If the sys-
tem operates two sensors together or both of them are switched off than at the top of
the display the following warning text will appear: “
Select one sensor
”. In order to se-
lect the required sensor press buttons
and
located in the upper right corner
