© PCE Instruments
6
6.2.1
Settings
You can make the following settings
(a) Unit of temperature
Unit degrees Fahrenheit
℉
or degrees Celsius
℃
b) Alarm
Touch the display field to switch the alarm on or off
(c) Maximum and minimum temperature and humidity
The alarm must be enabled before values can be entered.
Enter the values using the keypad and confirm with OK.
d) Sample rate
Here you can define how often the alarm data are saved.
H: for hours, M: for minutes, S: for seconds
Tap on "Save" to accept the settings.
Note
:
When the alarm is triggered, the instrument beeps and the large display shows the temperature
alarm icon or humidity alarm icon or both in the upper right corner.
