PCE Health and Fitness CTT 10, Руководство пользователя

Страница: 8 / 16

© PCE Instruments
6
To make settings for this measuring mode, press the "Menu" key twice.
Setting Meaning
Start Load Here you set the force at which the average measurement should start.
Initial Delay Here you enter the time span at the beginning of the measurement that is
not to be taken into account in the average measurement. Available
settings: 0.0 ... 300.0 seconds. Resolution 0.1 seconds. This parameter
only affects the MOD1 function.
Averaging Time Here you set the measuring time for the average measurement. Available
settings: 0.0 ... 300.0 seconds. Resolution 0.1 seconds. This parameter
only affects the MOD1 function.
Average Mode Here you select between the MOD1 and MOD2 function.
To select a parameter, use the arrow keys. Press the "Enter" key to select a parameter. Use the
arrow keys again to change the parameter properties. Press the "Enter" key again to apply the
settings you have made.
5.3.1 Measuring procedure
When "WAIT" is displayed on the screen, the meter waits until the set minimum load is applied.
When "DELAY" is shown on the display, the force gauge will wait until the set minimum time has
elapsed.