PCD UK01, Руководство пользователя

Страница: 6 / 23

UK01 User manual
5
The last line
Currently assigned to the function of the two soft
keys and dial touch buttons
Three. Start using
1. A phone is switched on / off
Press and hold button on phone boot or shut down.
2. installation and removal battery/SIM card/memory card
When you apply for a network, you will get a SIM card, which contains proprietary
information, such as the PIN, you can get the service options.

use a SIM card please note the following information:

all miniature SIM cards should be placed on the children of the reach;

the SIM card and its contacts can easily scratch or be damaged due to
bending, so

Carry, to be extra careful when you insert or remove the SIM card;

Before installing the SIM card, be sure to turn off the
phone and then remove the battery

Installation and removal of the battery and SIM as follows

If necessary, press and hold button until shutdown;

1
、
the upward pull from the battery cover;
2
、
lift the battery from the battery to the left buckle, remove the
battery;
3
、
the SIM card into the SIM card holder, until not move.

The gold contacts of the SIM card face down;

The gap of the SIM card, such as the shell at the identification;

To install the battery

Metal contacts on the first battery at the battery-deck shrapnel, and
then press the battery can be down;

Install the battery cover
The first battery cover both ends of the buckle at the back shell groove away, and then the
battery cover and push down the back cover as shown, to hear the" buckle" sound can be.

Installation and removal of the T-flash card

The phone uses a the clamshell Micro SD deck;

Install the T-flash card. Open the clamshell T-Flash card connector, the
metal of the T-flash card face down, according to the identity of the
shell at the memory card into the slot, will deck down to hear the "label"
sound can ;

Remove the T--flash. Push up the deck to hear the sound release the
"label", you can Remove the memory card
3. Battery charging

Connect the charger to plug in the power ；

The top of the charger connector into the phone's USB interface 。

If the charger is turned off, the screen displays charging video and
indicates that the battery charge

If the phone power is low, is still excessive use, charging starts, it may