Model Number
RH401B04
ICP® CIRCUIT SIMULATOR
Revision: NR
ECN #: 47284
[5]
Performance
ENGLISH
SI
Gain(+0 to -2 %)
1
1
Output Range
± 5 V
± 5 V
Low Frequency Response
0 Hz
0 Hz
High Frequency Response(2.0 mA)
110 kHz
110 kHz
[4]
High Frequency Response
(4 mA)
220 kHz
220 kHz
[4]
High Frequency Response
(20 mA)
1000 kHz
1000 kHz
[4]
Non-Linearity
≤
2 % FS
≤
2 % FS
Environmental
Temperature Range(Operating)
+30 to +150 °F
-1.1 to +65.5 °C
Electrical
Excitation Voltage
+18 to 30 VDC
+18 to 30 VDC
[1]
Output Bias Voltage
+7 to 14 VDC
+7 to 14 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Current
1 to 19 mA
1 to 19 mA
[2]
Output Impedance
<100 Ohm
<100 Ohm
Broadband Electrical Noise(10 kHz)
12 µV rms
12 µV rms
[3]
Spectral Noise(1 Hz)
4 µg/
√
Hz
4 µg/
√
Hz
[3]
Spectral Noise
(10 Hz)
1 µg/
√
Hz
1 µg/
√
Hz
[3]
Spectral Noise
(100 Hz)
0.3 µg/
√
Hz
0.3 µg/
√
Hz
[3]
Spectral Noise
(1 kHz)
0.1 µg/
√
Hz
0.1 µg/
√
Hz
[3]
Spectral Noise
(10 kHz)
0.05 µg/
√
Hz
0.05 µg/
√
Hz
[3]
Insulation Resistance(Minimum)
10
9
Ohm
10
9
Ohm
Physical
Housing Material
Aluminum
Aluminum
Electrical Connector(Input)
BNC Plug
BNC Plug
Electrical Connector
(Output)
BNC Jack
BNC Jack
Size (Length x Width x Height)
2.2 in x 1.1 x 0.9
55.9 mm x 27.9 x 22.9
Weight
2.50 oz
70.9 gm
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
This model, designated with an RH prefix, is RoHS compliant. For further details, and to obtain PCB's RoHS
Statement of Conformance, please visit http://www.pcb.com
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
NOTES:
[1] Voltage < 20 VDC reduces input range to ±3V.
[2] Excitation current supplied minus 1 mA nominal current consumption.
[3] Typical, tested with 1000 pF capacitance at input.
[4] Above stated frequency, the amplifier becomes slew rate limited.
[5] See PCB Declaration of Conformance PS024 for details. A low impendance connection from
case to earth ground is required to maintain CE compliance.
Entered: LK
Engineer: BAM
Sales: KWW
Approved: BAM
Spec Number:
Date: 9/28/2017
Date: 9/28/2017
Date: 9/28/2017
Date: 9/28/2017
68059
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
Содержание RH401B04
Страница 9: ......
