PCB Piezotronics P112A05, Инструкция по установке и эксплуатации

Страница: 15 / 17

Model Number
112A05
CHARGE OUTPUT PRESSURE SENSOR
Revision: K
ECN #: 48697
[3]
Performance ENGLISH SI
Sensitivity(-10 to +25 %) 1.1 pC/psi 0.160 pC/kPa
Measurement Range 5 kpsi 34,475 kPa
Maximum Pressure(static) 10 kpsi 68,950 kPa
Resolution 4 mpsi 0.028 kPa
[1]
Resonant Frequency ≥ 200 kHz ≥ 200 kHz
Rise Time(Reflected) ≤ 2.0 µ sec ≤ 2.0 µ sec
Non-Linearity ≤ 1.0 % FS ≤ 1.0 % FS
[2]
Environmental
Acceleration Sensitivity ≤ 0.003 psi/g ≤ 0.0021 kPa/(m/s²)
Temperature Range(Operating) -400 to +600 °F -240 to +316 °C
Temperature Coefficient of Sensitivity ≤ 0.03 %/°F ≤ 0.054 %/°C
Maximum Flash Temperature 3000 °F 1649 °C
Maximum Shock 10,000 g pk 98,070 m/s² pk
Electrical
Capacitance 18 pF 18 pF
Insulation Resistance(at room temp)
≥ 10
12
Ohm ≥ 10
12
Ohm
Physical
Sensing Element Quartz Quartz
Sensing Geometry Compression Compression
Housing Material 17-4 Stainless Steel 17-4 Stainless Steel
Diaphragm 316L Stainless Steel 316L Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 0.212 oz 6.0 gm
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
E
- Emralon coating
Coating Emralon Emralon
Electrical Isolation(Case)
10
8
Ohm 10
8
Ohm
Supplied Accessory : Model 065A08 Isolation ring 0.250"OD x 0.218" ID x 0.027" thk anodized
aluminum (3)
Supplied Accessory : Model 065A22 Isolation Seal, .250" OD x .218" ID x .015", Torlon or
Vespel (3)
P
- Positive Output Polarity
W
- Water Resistant Cable
Supplied Accessory : Model 060A03 Clamp nut, 5/16-24-2A thd, 1/4" hex, stainless steel (1)
WM
- Water Resistant Cable
Supplied Accessory : Model 060A05 Clamp nut M7 x 0.75-6g thd (1)
NOTES:
[1] Resolution dependent on range setting and cable length used in charge system.
[2] Zero-based, least-squares, straight line method.
[3] See PCB Declaration of Conformance PS158 for details.
SUPPLIED ACCESSORIES:
Model 060A03 Clamp nut, 5/16-24-2A thd, 1/4" hex, stainless steel (1)
Model 060A05 Clamp nut M7 x 0.75-6g thd (1)
Model 065A02 Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass (3)
Model 065A05 Seal sleeve sensor recess mount 0.248" OD x 0.221" ID x 0.240" thk 17-7 (1)
Entered: LK Engineer: RPF Sales: RWM Approved: BAM Spec Number:
Date: 9/24/2018 Date: 9/24/2018 Date: 9/24/2018 Date: 9/24/2018
7304
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com