PCB Piezotronics Larson Davis BAS002, Руководство пользователя

Страница: 40 / 75

BAS002 Configuring TCP/IP 7-6
Figure 7-5 shows an example of IP address configuration.
FIGURE 7-5 IP Address Configuration
To simplify the connection, use a
CAT5E cable directly to the
amplifier. Once the connection is established, the LED on the Ethernet
port changes from a flashing red to a steady green.
Selecting USB Signal Sources
To select USB signal sources in the BAS002 software,
follow these steps:
Step 1 Insert the flash memory device containing the
source file into the USB port of the amplifier.
Step 2 On the Channel area, click USB in , as shown in
Figure 7-6.
FIGURE 7-6 Channel: USB in