PCB Piezotronics Larson Davis BAS002, Руководство пользователя

Страница: 25 / 75

3-9 Setting the Timer BAS002
Step 3
Insert the BNC connector end of CBL181 into the
AUX in connector on the BAS002 amplifier. Figure 3-6
shows the connection.
CBL180 and CBL181 are optional
accessories.
FIGURE 3-6 CBL181 Connection to Power
Amplifier
Setting the Timer
To use the timer, select the TIMER field and press OK . The
timer starts the following sequence:
The amplifier pauses for a specified
PauseTime .
• After the pause, the amplifier plays the selected file for
the specified PlayTime .
• After playing for the specified PlayTime , the amplifier
pauses again for the specified PauseTime .
This sequence is repeated for the specified number of
repeatTimes .
The default values for TIMER variables are as follows:
The PauseTime, PlayTime, and
repeatTimes values can be set using
the BAS002 software. • PauseTime : 3 seconds
• PlayTime : 10 seconds
• repeatTimes : 3 cycles
Selecting the TIMER field and pressing OK stops the
sequence but not the playing of the file, if it is running.