PCB Piezotronics Larson Davis BAS002, Руководство пользователя

Страница: 22 / 75

BAS002 Display and Keypad 3-6
The left side of the BAS002 display indicates the amplifier
status. Table 3-2 describes the indications for each status
area.
BasBOOST
Select this field and press OK to enable or dis-
able. When enabled, an “F” appears in the dis-
play above the “dB.” This function enhances
low frequencies, below 100 Hz by pushing a 1/3
octave band up by 15 dB.
Display Field (Right Side) Keypad Control
Table 3-1 Keypad Controls for BAS002 Display (Right Side)
Status Area Indication
Clipping Indicator
When inversely lit, indicates that the amplifier is
in clipping mode and will activate protection cir-
cuits to lower output power.
Pause Timer Shows the seconds remaining for pause mode.
Run Count
Shows the number of iterations left to complete
the TIMER cycle.
Play/Stop Status
When playing, shows the PLAY icon in USB
mode or the AUX icon in AUX mode.
Play Duration The time the current file has been playing in
USB mode.
Output Volume Attenuation Shows volume.
BasBOOST Indicator Displays an F icon when BasBOOST is on.
Cycling Indicator Displays a T icon when cycling is on.
Stand-by Indicator When reverse lit, indicates that the amplifier is
in stand-by mode, lowering the power output
signal.
Table 3-2 BAS002 Status Display (Left Side)