PAGE 15
SENSO
RS AN
D INS
TRUME
N
TATIO
N F
OR MAC
HINE
CON
DITIO
N M
ONIT
ORIN
G
Running the Software
Connect the USB programmer cable to a USB port on the PC and then run the software from the Start | All
Programs | PCB EE225 Software menu item.
Initially the screen will appear as in
Error! Reference source not found.
with a yellow bar and status indicating
‘Initializing…’ followed by the message: “Connecting to USB Dongle…”.
Figure 17
– Software While Connecting to USB Programmer Cable
Once the connection is made the bar at the top of the screen will turn green and the status will indicate “USB
Connection Success -
Select a device”. If the software and USB programmer cable fail to connect, remove and
reinsert the USB programmer cable.
Figure 18
– Software After Connecting to USB Programmer Cable
