background image

Model Number

687A02

HANDHELD VIBRATION METER

Revision: C

ECN #: 47534

Performance

ENGLISH

SI

Frequency Re10 to -20 %)

600 to 60,000 cpm

600 to 60,000 cpm

[5]

Frequency Response

(+/-3 dB)

3 to 3000 kcpm

99 to 3,000,000 cpm

[5]

Acceleration Range

0.01-199.99 g rms

0.01-19.99 g rms

Resolution

± 2 counts

± 2 counts

[1]

Velocity Range

0.001-1.999 in/sec rms

NA

Accuracy

± 3 %

± 3 %

[1]

Environmental

Temperature Range

+32 to +122 °F

0 to +50 °C

[4]

Electrical

Excitation V/-1 VDC)

24 VDC

24 VDC

Constant Current Exci/-0.6 mA)

2 mA

2 mA

Bias Voltage

0.00 to 19.99 VDC

0.00 to 19.99 VDC

Battery Life(Alkaline)

10 hours

10 hours

[1]

Battery Life

(Rechargeable Ni Cad)

3 hours

3 hours

[2][3]

Physical

Size (Length x Width x Height)

5.9 in x 3.15 in x 1.2 in

150 mm x 80 mm x 30 mm

Weight(with battery)

0569 lb

0569 lb

Connector(Input)

BNC Jack

BNC Jack

Connector

(Headphones)

1/8" Stereo Jack

1/8" Stereo Jack

ROHS Compliant

No

No

All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.

ICP

®

is a registered trademark of PCB Group, Inc. 

OPTIONAL VERSIONS

Optional versions have identical specifications and accessories as listed for the standard model 

except where noted below. More than one option may be used.

R

- Rechargeable option, includes rechargable batteries and charger.

Supplied Accessory : Model 017A01 Power Cord (1)
Supplied Accessory : Model 073A09 Rechargeable NiCad battery (9V) (1)
Supplied Accessory : Model 073M12 External Charger (1)

NOTES:

[1] Typical value.
[2] Typical.
[3] Varta TR7/8 or Eveready N88 for rechargeable version.
[4] Non-condensing.
[5] 1Hz = 60 cpm (cycles per minute).

Entered: LK

Engineer: RB

Sales: MC

Approved: BAM

Spec Number:

Date: 5/15/2018

Date: 5/15/2018

Date: 5/15/2018

Date: 5/15/2018

11285 

3425 Walden Avenue, Depew, NY 14043

Phone: 800-959-4464
Fax: 716-684-3823
E-Mail: [email protected]

Содержание IMI Sensors 687A02
















Отзывы: