PCB Piezotronics EX619A11, Инструкция по установке и эксплуатации

Страница: 21 / 35

Model Number
EX619A11
CHARGE OUTPUT ACCELEROMETER
Revision: NR
ECN #: 44641
Performance ENGLISH SI
Sensitivity(± 5 %) 50 pC/g 5.1 pC/(m/s²)
Measurement Range ± 500 g pk ± 4905 m/s² pk
Frequency Range(± 5 %) 3000 Hz 3000 Hz [2]
Frequency Range (+10 %) 5000 Hz 5000 Hz [2]
Resonant Frequency >18 kHz >18 kHz [1]
Non-Linearity ≤ 1 % ≤ 1 % [3]
Transverse Sensitivity ≤ 5 % ≤ 5 % [4]
Environmental
Overload Limit(Shock) ± 2000 g pk ± 19,620 m/s² pk
Temperature Range -65 to +900 °F -54 to +482 °C
Temperature Response See Graph See Graph [1]
Temperature Response See Graph See Graph
Temperature Response See Graph See Graph
Base Strain Sensitivity ≤ 0.033 g/µ ε ≤ .32 (m/s²)/µ ε
Electrical
Capacitance(Pin to Pin) 1525 pF 1525 pF [1]
Capacitance (Pin to Case) 250 pF 250 pF [1]
Insulation Resistance(Pin to Case 70° F)
>10
9
Ohm >10
9
Ohm
Insulation Resistance (Pin to Pin 70° F)
>10
9
Ohm >10
9
Ohm
Insulation Resistance (Pin to Pin 900° F) >100 kohm >100 kohm
Output Polarity Differential Differential
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Compression Compression
Housing Material Inconel Inconel
Sealing Hermetic Hermetic
Size (Height x Length x Width) 1.49 in x 1.63 in x 1.63 in 38 mm x 41.4 mm x 41.4 mm
Weight(with cable) 19.4 oz 550 gm [1]
Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
Electrical Connection Position Side Side
Cable Length 7 ft 2.1 m
Cable Type MI Hardline Cable MI Hardline Cable
Mounting Through Holes (4) Through Holes (4)
[5]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
NOTES:
[1]Typical.
[2]Low frequency response is determined by external signal conditioning electronics.
[3]Zero-based, least-squares, straight line method.
[4]Transverse sensitivity is typically ≤ 3%.
[5]See PCB Declaration of Conformance PS141 for details.
SUPPLIED ACCESSORIES:
Model 62177-01 1/4-28 x 1 1/4in long (1)
Model ICS-1 NIST-traceable single-axis amplitude response calibration from 600 cpm (10 Hz) to
upper 5% frequency
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard
model except where noted below. More than one option may be used.
Entered: JM Engineer: JJD Sales: EGY Approved: NJF Spec Number:
Date: 9/30/2015 Date: 9/30/2015 Date: 9/30/2015 Date: 9/30/2015
62610