Model Number
682B03
ICP
®
VIBRATION TRANSMITTER
Revision A
ECN #: 32835
Performance ENGLISH
SI
Channels
1
1
Input Signal (Vibration)
±100 mV/g
±10.2 mV/(m/s²)
[4]
Input Signal (Temperature)
0 to 1.2 VDC
0 to 1.2 VDC
[5]
Output Signal (DC Vibration)
4 to 20 mA
4 to 20 mA
[6]
Output Signal (DC Vibration)
0 to 5 VDC
0 to 5 VDC
[7][3]
Output Signal (DC Vibration)
0 to 10 VDC
0 to 10 VDC
[7][3]
Output Signal (Temperature)
4 to 20 mA
4 to 20 mA
[5]
Output Signal (±0.01 %) (AC Vibration)
100 mV/g
10.2 mV/(m/s²)
[8]
Frequency Range (-3 dB) (Acceleration)
180 to 600000 cpm
3 to 10k Hz
[9][10][1
1]
Frequency Range (-3 dB) (Velocity)
210 to 600000 cpm
3.5 to 10k Hz
[9][10][1
1]
Frequency Range (-3 dB) (Displacement)
210 to 60000 cpm
3.5 to 1000 Hz
[9][12][1
0]
Output Range (DC Acceleration)
0 to 5.00 g pk or
rms
0 to 49.03 m/s
2
pk or
rms
[13][4][3
]
Output Range (DC Acceleration)
0 to 10.00 g pk or
rms
0 to 98.06 m/s
2
pk or
rms
[13][4][3
]
Output Range (DC Acceleration)
0 to 20.00 g pk or
rms
0 to 196.12 m/s
2
pk or
rms
[13][4][3
]
Output Range (DC Velocity)
0 to 0.5 in/sec pk
or rms
0 to 12.7 mm/s pk or
rms
[13][4][3
]
Output Range (DC Velocity)
0 to 1.00 in/sec pk
or rms
0 to 25.4 mm/s pk or
rms
[13][4][3
]
Output Range (DC Velocity)
0 to 2.00 in/sec pk
or rms
0 to 50.8 mm/s pk or
rms
[13][4][3
]
Output Range (DC Displacement)
0 to 10.0 mil pk -
pk
0 to 0.254 mm pk - pk
[13][4][3
]
Output Range (DC Displacement)
0 to 20.0 mil pk -
pk
0 to 0.508 mm pk - pk
[13][4][3
]
Output Range (DC Displacement)
0 to 40.0 mil pk -
pk
0 to 1.02 mm pk - pk
[13][4][3
]
Environmental
Temperature Range (Operating)
32 to 158 °F
0 to 70 °C
Temperature Range (Storage)
-40 to 257 °F
-40 to 125 °C
Humidity Range (Non-Condensing)
0 to 95 %
0 to 95 %
Electrical
Power Required
DC power
DC power
DC Power
23 to 25 VDC
23 to 25 VDC
DC Power (maximum)
100 mA
100 mA
Settling Time
<2 min
<2 min
Excitation Voltage (delivered to sensor)
17 to 19 VDC
17 to 19 VDC
[1][2]
Constant Current Excitation (delivered to
sensor)
3 to 5 mA
3 to 5 mA
[1][2]
Output Span (±5.0 %) (DC Vibration
Current Output)
16 mA
16 mA
Output Span (±5.0 %) (Temperature
Output)
16 mA
16 mA
Output Span (±5.0 %) (DC Vibration
Voltage Output)
5 or 10 VDC
5 or 10 VDC
[3]
Physical
Electrical Connector (input/output) Removable
Screw
Terminals
Removable Screw
Terminals
Electrical Connector (raw vibration output)
BNC Jack
BNC Jack
Housing Material
Polyamide
Polyamide
Optional Versions
(Optional versions have identical specifications and accessories as listed
for standard model except where noted below. More than one option maybe used.)
Notes
[1] Jumper selectable for 18 VDC regulated, 24 VDC power supply voltage or ICP®
sensor excitation disabled
[2] 4 mA constant current diode is internal to 9330VT
[3] Internal Dip switch selectable
[4] Output measurement range is based upon input from 100 mV/g ICP®
accelerometer and will be scaled inversely proportional to any percentage deviation of
this input.
[5] Requires use of accelerometer with "TO" temperature output option.
[6] Output current voltage will fluctuate at frequencies below 5 Hz.
[7] Factory set, 0-5 VDC.
[8] Achieved with 100 mV/g ICP® accelerometer input.
[9] Attenuation is -40 dB/decade.
[10] The low frequency tolerance is accurate within ± 0.5 Hz of the specified
frequency.
[11] The high frequency tolerance is accurate within ± 0.5 kHz of the specified
frequency.
[12] Maximum 1,000 Hz for displacement.
[13] Factory set, 1 in/sec peak.
[14] See PCB Declaration of Conformance PS051 for details.
Entered: LLH
Engineer: NJF
Sales: EGY
Approved: MRS
Spec Number:
Date:
04/29/2010
Date:
04/24/2010
Date:
04/24/2010
Date:
07/08/2010
40536
3425 Walden Avenue
Depew, NY 14043
UNITED STATES
Phone: 716-684-0003
Fax: 716-684-3823
E-mail: [email protected]
Web site: www.imi-sensors.com
Содержание 682B03
Страница 20: ......
