Model Number
132B38
ICP® PRESSURE SENSOR
Revision: B
ECN #: 47252
[6]
Performance
ENGLISH
SI
Measurement Range
50 psi
345 kPa
Sensitivity(± 30 %)
140 mV/psi
20.3 mV/kPa
Maximum Pressure(Dynamic)
800 psi
5516 kPa
Resolution
1 mpsi
0.007 kPa
[2]
Rise Time(Incident)
≤
3 µ sec
≤
3 µ sec
[3]
Rise Time
(Reflected)
≤
1 µ sec
≤
1 µ sec
Low Frequency Response(-5 %)
11 kHz
11 kHz
High Frequency Response
1 MHz
1 MHz
[4][2]
Environmental
Temperature Range(Operating)
-13 to +175 °F
-25 to +79 °C
Electrical
Output Polarity(Positive Pressure)
Positive
Positive
Discharge Time Constant(at room temp)
≥
.000045 sec
≥
.000045 sec
[1]
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤
100 Ohm
≤
100 Ohm
Output Bias Voltage
8 to 14 VDC
8 to 14 VDC
Physical
Sensing Element
Ceramic
Ceramic
Housing Material
Stainless Steel
Stainless Steel
Sealing
Epoxy
Epoxy
Weight
0.45 oz
12.77 gm
[5]
Cable Termination
Pigtail
Pigtail
Cable Type
030 Coaxial
030 Coaxial
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
NOTES:
[1] Calculated.
[2] Typical.
[3] Rise time in air at Mach 1
[4] High frequency response may be limited by supply current and output cable length.
[5] Typical; with cable.
[6] See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 070B09 Solder adaptor (1)
Entered: LK
Engineer: RB
Sales: RWM
Approved: BAM
Spec Number:
Date: 10/5/2017
Date: 10/5/2017
Date: 10/5/2017
Date: 10/5/2017
66470
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]