Model Number
103B02
ACOUSTIC ICP PRESSURE SENSOR
Revision: B
ECN #: 40794
Performance
ENGLISH
SI
Measurement Range
3.00 psi
180.3 dB
Useful Overrange
6.00 psi
186.3 dB
[1]
Sensitivity(± 15 %)
1500 mV/psi
217.5 mV/kPa
Maximum Pressure
250 psi
1724 kPa
Resolution
0.02 mpsi
77 dB
Resonant Frequency
≥
13 kHz
≥
13 kHz
Rise Time
≤
25 µ sec
≤
25 µ sec
Low Frequency Response(-5 %)
5 Hz
5 Hz
Non-Linearity
≤
2.0 % FS
≤
2.0 % FS
[2]
Environmental
Acceleration Sensitivity
≤
0.0005 psi/g
≤
0.0035 kPa/(m/s²)
Temperature Range(Operating)
-100 to 250 °F
-73 to 121 °C
Temperature Coefficient of Sensitivity
≤
0.2 %/°F
≤
0.36 %/°C
Maximum Flash Temperature
1000 °F
538 °C
Maximum Shock
1000 g pk
9807 m/s² pk
Electrical
Discharge Time Constant(at room temp)
≥
0.1 sec
≥
0.1 sec
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤
100 Ohm
≤
100 Ohm
Output Bias Voltage
7 to 13 VDC
7 to 13 VDC
Physical
Sensing Element
Ceramic
Ceramic
Housing Material
Stainless Steel
Stainless Steel
Diaphragm
316L Stainless Steel
316L Stainless Steel
Sealing
Welded Hermetic
Welded Hermetic
Electrical Connector
10-32 Coaxial Jack
10-32 Coaxial Jack
Weight
0.11 oz
3.15 gm
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
M
- Metric Mount
Supplied Accessory : Model 060A24 Clamp nut M14 x 1.25-6G thd 11 mm hex 17-4 SS material
(1)
NOTES:
[1] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may
be limited by output bias.
[2] Zero-based, least-squares, straight line method.
SUPPLIED ACCESSORIES:
Model 060A10 Clamp nut 1/2-20-2A thd 7/16" hex (1)
Model 065A66 Adhesive Mounting Ring (3)
Model 160-0242-00 O-ring .250x.375(2-0100) (3)
Entered: AP
Engineer: jg
Sales: KWW
Approved: BAM
Spec Number:
Date: 3/18/2013
Date: 3/18/2013
Date: 3/18/2013
Date: 3/18/2013
24258
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
