21
When see the Dialog Press “Keep Changes” for save the new parameter, if no any display on screen, Please
wait for 30 seconds UMCC will automatic revert to previous parameter setting.
Press Apply the UMCC will setting 2 functions of devices at the same time:
1.
Display Resolution
（
GPU need take time for new resolution change
，
if not change resolution, UMCC
will do next comment
）
2.
Bezel Position
（
Don’t need to change any GPU Parameter
，
Modify device output bezel size by each
monitor only
）
Please disable GPU GROUP Function first before Change any Display parameter.
Device Setting sync
：
Device Setting Sync Enable
：
Press HW Reset or Apply function on all device at the same time.
Device Setting Sync Disable
：
Press HW Reset or Apply function on selected device.
