16
16
16
16
16
Technical Reference Booklet
014828
Flash Update Procedure
Flash Update Procedure
Flash Update Procedure
Flash Update Procedure
Flash Update Procedure
A program AWDFLASH.EXE is included in the utility diskette or CD (X:\Utility\
AWDFLASH.EXE). The user is recommended to follow the procedure below to update
the flash BIOS.
(X: your CD driver letter).
1.
Create a DOS-bootable floppy diskette. Copy the new BIOS file (just obtained or
downloaded) and the utility program AWDFLASH.EXE to the diskette.
2.
Allow the PC system to boot from the DOS diskette.
3.
At the DOS prompt, key in
AWDFLASH
AWDFLASH
AWDFLASH
AWDFLASH
AWDFLASH
and hit <ENTER>
4.
Enter the file name of the new BIOS.
5.
The question: “Do you want to save BIOS (Y/N)” is displayed.
Key in “N” if there is no need to save the existing BIOS content..
Key in “Y” if a backup copy of the existing BIOS is needed.
(A file name has to be assigned to the existing BIOS binary file.)
6.
The question : “Are you sure to program (Y/N)” is displayed.
Key in “Y”
7.
Wait until the flash-update is completed.
8.
Power down the PC system.
9.
Restart the PC.
Warning:
DO not turn off or RESET the computer during the flash process.
If you are unsure how to upgrade the BIOS, it is best to take your
computer to an Authorized Service Center and have a trained
technician do the work for you.
APPENDIX
APPENDIX
APPENDIX
APPENDIX
APPENDIX
Note to User:
Note to User:
Note to User:
Note to User:
Note to User:
The bundled driver CD attached an Auto-Run feature for all the drivers
that the motherboard need. Please select the drivers that you want
to install and click the button on the installation panel.
