10
10
10
10
10
Technical Reference Booklet
Installing a New Processor
Installing a New Processor
Installing a New Processor
Installing a New Processor
Installing a New Processor
An upgrade processor can dramatically increase general system speed and performance.
Most microprocessor upgrade kits include the following items:
•
Microprocessor chip
•
Installation instructions and technical data
Before installing the processor, please refer to the installation notes that
available with the CPU package.
To Install a Processor to ZIF Socket
To Install a Processor to ZIF Socket
To Install a Processor to ZIF Socket
To Install a Processor to ZIF Socket
To Install a Processor to ZIF Socket
To install the processor, follow these steps:
1.
If the system microprocessor is already on the motherboard socket, you need to
remove it from the motherboard socket. The socket is a Zero Insertion Force (ZIF)
socket which has a metal arm at one side. Carefully grasp this arm, move it horizontally
away from the socket and lift it up. Eventually you will be able to lift the chip straight
up out of the socket. Be careful not to bend any pins.
Be careful not to bend any of the pins when removing the microprocessor
chip from its socket. The microprocessor chip can be permanently damaged.
2.
Unpack the new microprocessor chip.
3.
Carefully align the processor with the correct orientation to the socket on the
motherboard.
4.
Carefully insert the processor into the socket, and move the metal arm downward to
replace it in its original position.
Connect the Cooling Fan Connector
Connect the Cooling Fan Connector
Connect the Cooling Fan Connector
Connect the Cooling Fan Connector
Connect the Cooling Fan Connector
The CPU should always have a Heat Sink and cooling fan attached to prevent
overheating.
Please follow the setup to install the Heat Sink and cooling fan. Then connect the
processor fan cable to the fan connector that located on the motherboard near the
processor and ensure the fan can operate. Otherwise the CPU can overheat and cause
damage to both CPU and motherboard.
Setting the Processor Speed
Setting the Processor Speed
Setting the Processor Speed
Setting the Processor Speed
Setting the Processor Speed
After you install the processor into the motherboard, set the processor speed by CMOS
setup.
