3
HARDWARE CONFIGURATION
This motherboard is based on the Intel® 810 chipset that is the first generation
Integrated Graphics chipset designed for the Intel® Celeron® PPGA Processor.
The graphics accelerator architecture consists of dedicated multi-media
engines executing in parallel to deliver high performance 2D, 3D, and motion
compensation video capabilities. In additional of AC’97 allows to use software
configurable AC’97 audio and modem coder/decoders via AMR slot instead of
the traditional ISA devices. Features on-board include LPC, Ultra DMA33, PCI
bus master IDE, PCI Ver 2.2 compliance, USB, VRM 8.2 compliance, Micro ATX
specification 1.0 compliance, PCI sound system(optional).
Key Features
Processor
•
Full support for the Intel® Celeron® PPGA processors using PGA370
Socket.
•
Supports 66MHz and 100MHz bus speed Intel® Celeron® PPGA processor
and future PPGA processor
CPU Speed Jumperless
•
No jumper is needed to set for various speed of CPU.
VRM (Voltage Regulator Modules) on Board
•
Flexible motherboard design with on-board VRM 8.2, easy to upgrade
with Intel’s® Future Overdrive® processors.
Cache
•
Processor built-in L2 128K cache.
System Memory
•
Up to 256MB or 512MB using 128M bit technology.
•
100MHz Bus speed.
PC98/99
•
PC98/99 ready (Use PC99 connector).
Expansion Slots
•
1 Audio Modem Riser (AMR).
•
3 PCI bus master slots (ver. 2.2 compliant).
•
1 ISA slot (optional).
On-Board I/O
•
Two PCI fast IDE ports supporting up to 4 ATA2, Ultra DMA 33 IDE HDDs,
CD-Roms, ZIP devices and LS-120 drives as boot drive.
•
Supports bus master IDE, PIO mode 4 (up to 16M bytes/sec) and Ultra
DMA 33 (up to 33M bytes/sec) transfer.
•
One ECP/EPP parallel port .
•
Two 16550-compatible UART serial ports.
Hardware Setup
