12
Technical Reference Booklet
Standard CMOS Setup
The items in Standard CMOS Setup Menu are divided into 10 categories. Each category
includes, one or more setup items. Use the arrow keys to highlight the item and then use
the <PgUp> or <PgDn> key to select the desired value in each item.
(Note : The figures of BIOS Setup Menu included here only show a typical
case, and may not be exactly the same as the one on your unit.)
Date
The date format is <day-of-the-week>. <day> <year>.
T i m e
The time format is <hour> <Minute> <second> displayed in 24-hour military-
time clock. For example, 1 p. m. is displayed as 13:00:00.
Floppy Drive A: / This category identifies the types of floppy disk drive A or
Floppy Drive B :
drive B that has been installed in the computer.
Pri Master/
These categories identify the types of the two channels that have
Pri Slave/
been installed in the computer. There are 46 predefined types and
Sec Master/
four user definable types in BIOS. Type 1 to Type 46 are predefined.
Sec Slave
Type “user” is user-definable.
Press PgUp or PgDn to select a numbered hard disk type or type he
number and press <Enter>. Note that the specification of your drive must
match with those of the drive table. The hard disk will not work
properly if your enter improper information for this category. If your
hard disk drive type is not matched or listed, you can select Type
“User” to define your own drive type manually.
If you select Type “User”, you will need to know the information listed
below. Enter the information directly from the keyboard and press
<Enter>. This information should be included in the documentation
from your hard disk vendor or the system manufacturer.
If the controller of the HDD interface is ESDI, the selection shall be
“ Type1”.
