background image

M755LMR Mainboard User’s Manual 

 

 

14 

Install the Extension Brackets 

The extension brackets are used to connect features on the 
mainboard to external connectors that can be attached to the system 
chassis. Follow the steps below to install the extension brackets. 
 

Note:

 All the ribbon cables used on the extension brackets have a 

red stripe on the Pin-1 side of the cable. 

 

Audio Ports and Game/MIDI Port Extension Bracket 

This bracket provides three audio jacks for stereo line in, stereo 
line out and microphone. In addition it has a 15-pin D-connector 
which can be used by either a joystick or a MIDI device. 
If you are using a four channel speaker system, channel one and 
two are output through the Stereo Line-out, and the rear speaker 
channels three and four are output through Stereo Line-in. 
 

 
 
 
 
 
 
 
 
 
 

 
 
 
1.  On the mainboard, locate the 

SOUND1

 audio header for this 

bracket. 

2.  Plug the cable from the bracket into the audio header.  
3.  In the system chassis, remove a blanking plate from one of the 

expansion slots and install the extension bracket in the slot. 
Use the screw that held the blanking plate in place to secure 
the extension bracket. 

 
 

Audio Ports & Game/MIDI 
Extension Bracket 

Stereo Line-in 
/Rear speaker 
channels 3-4 

Microphone 

Stereo Line-out 
/Speaker 
channels 1-2 

Game/MIDI 

SOUND1- 
Audio Header 

Содержание M755LMR
















































Отзывы: