5
Before Operation
•
Carefully study and understand this owner's manual.
•
Read and follow chemical manufacturer's labels,
warnings, and instructions! A material safety data
sheet (MSDS) should be provided by the chemical
manufacturer.
•
To avoid injury from chemical hazards, wear the proper
protective clothing. Each chemical manufacturer's
clothing requirements are listed under the “Personal
Protective Equipment (PPE)” section in the chemical
instructions.
•
Do not wear loose-fitting clothing which may catch in
moving parts.
•
Never exceed the vehicle manufacturer's load rating.
•
Give the sprayer a visual inspection for any worn parts,
loose bolts, or other visible problems, and make the
necessary repairs. See the “Maintenance Instructions”
section for instructions.
•
Make sure the area is clear of any people or obstructions
before using the sprayer.
•
Have all operators practice operating the sprayer and
its attachments, using clean water only, until all persons
are completely capable of safe operation.
During Operation
•
Always be aware of bystanders, particularly children!
Always look before moving the sprayer or the utility
vehicle.
•
No passengers are allowed on or in the vehicle or
sprayer at anytime.
•
Keep hands and body parts clear of all moving parts.
•
Be aware of dangerous terrain such as holes, slopes,
drop-offs, banks, rocks, and hidden hazards.
Following Operation
•
Operate the vehicle and sprayer up and down slopes,
not across.
•
Allow for sprayer boom length when making turns.
•
Never leave running equipment unattended!
•
Remember that accidents can even happen to seasoned
operators. Always take your time and follow all safety
instructions.
•
Following operation, stop the vehicle, set brakes, shut
off engine, and remove ignition key.
•
Store the sprayer away from human and livestock
activity.
•
Park the sprayer on a hard level surface
•
Do not permit children to play on or around sprayer.
Pump Safety Precautions
•
Never pump flammable or explosive fluids such as
gasoline, fuel oil, kerosene, etc.
•
NOTE: The pump may be run dry for limited periods of
time without resulting in damage.
•
Always disconnect the power to the pump when
working on the pump. Failure to do this could result
in electrical shock.
Safety
