background image

8

Winterizing your Sprayer

1.  Verify  that  the  tank  is  empty  and  rinsed  out.    Pour  2 

gallons  of  RV  nontoxic  antifreeze  into  the  tank.    It  is 

not  recommended  to  use  engine  antifreeze.    Engine 

antifreeze can be harmful to humans, animals, crops, and 

the environment.

2.  Engage the pump and pump the antifreeze through the 

entire  system.    Ensure  that  the  antifreeze  has  been 

pumped through the entire system. 

3.  Store the sprayer in a safe, dry location away from the 

elements and human and animal activity.

4.  Before spraying in the spring, it is recommended to flush 

the sprayer with fresh water to cleanse it of the antifreeze 

and any other buildup.  

5.  Do  a  thorough  inspection  of  all  sprayer  components 

before spraying.

It is essential that you winterize your sprayer to avoid damage and to allow for optimal performance.  The winterization process 

should be undertaken before freezing conditions and/or after each season of use.  Failure to winterize your sprayer will void the 

manufacturer’s warranty.

Note:  Do not, under any circumstances, run any 

petroleum based substance (such as diesel fuel) 

through the boom.  This will cause damage to sprayer 

components and will void the manufacturer’s warranty.

Maintenance Instructions

Содержание CropCare ATV-BL20













Отзывы: