DXP-3800D
- 30 -
the LCD screen on front panel, the default IP address is
10.10.70.48
Enter the
“
ftp://10.10.70.48/pub
”
folder, then copy the
“
target.tgz
”
file in this folder,
as shown below.
. Please make
sure that the equipment and your PC are in the same IP network, refer to Figure 1.
Important:
DON
’
T switch off the equipment and your PC during the software
upgrade.
Open the IE browser and type ftp://10.10.70.48 in the address bar and press
Enter
.
If the network configuration is correct, you can open the FTP folder without any error,
as shown below.
Open MS-DOS window by typing
Start
on the lower left quarter of Windows OS.
Select
Run
and key in
“
cmd
”
in dialog and press
Enter
. Type the command
“
telnet
Figure 2: Open the FTP folder
Figure 3: Copy “target.tgz” File