PBI DXP-3800D, Руководство пользователя, Страница: 11 / 33

DXP-3800D
- 11 -
Name Description
Alarm
RS-232 Serial port for equipment debug use
Tuner In-1/4 Tuner signal input port 1~4
ASI Out-1/4
ASI Output ports in mirror 1~4
Common Interface To insert CI CAM modules, maximum two CI modules 1~4
Tuner In-5/8
Tuner signal input port 5~8
ASI Out-5/8 ASI Output ports in mirror 5~8
Common Interface To insert CI CAM modules, maximum two CI modules 5~8
ASI Out-9/10 ASI Output ports in Remux 1~2
Power Supply Double Power Supply,AC 90~250V 50-60Hz input
4.3 RS-232 Serial Port
The RS-232 port is used for equipment software debug use, its pin definition is shown in the table.
The parameter settings are:
●
No Parity bit
●
38400 Bauds
●
8 data bits
●
1 Stop bit
Pin Pin Function
1
N.C.
2
TXD
3
RXD
4 N.C.
5
GND
6
N.C.
7
N.C.
8
N.C.
9
N.C.
4.4 Management Ethernet Port
The Management port is used to remote control and supervise the equipment through IP, it’s also for
the software update. Its factory setting is as following:

IP address:10.10.70.48

Sub Mask:255.255.255.0

Gateway:10.10.70.1