DMM-2410D
Quad Channels Receiver and Processor
14
Pro Broadband Inc.
8.2 Configuration
8.2.1 Configuration - > Tuner
All parameters for Tuners and ASI Output can be found under the page “Configuration”. Click the
button "Apply" to submit your configuration or click the button "Cancel" to cancel and restore the
previous settings.
Tuner-1~4:
There are 6 options to set DVB-S2 parameters. After signal locked, the TUNER LOCK indicator on
front panel will turn green.
LNB Frequency:
Input LNB frequency
Satellite Frequency:
Input downstream frequency of satellite
Symbol Rate:
Input symbol rate of satellite
LNB Voltage:
select the correct LNB voltage output of the F-connector: Off, 13 V, 18 V. <A>
LNB 22KHz:
activate the LNB 22 kHz control signal to the LNB: On or Off. <B>
DISQEC:
Can select OFF/Port A/Port B/Port C/Port D
Note:
please contact the local satellite operator for the satellite frequency and symbol rate.
<A> Normally, 13V switches the LNB to receive Vertical/Left hand polarization while 18V receive
Horizontal/Right hand.
<B> Normally, 22KHz control signal switches the LNB to receive high band if any.
8.2.2 Configuration - > ASI OUT
Set parameters for ASI Output.