1701IM
- 10 -
Config
Program
Video Output
Video Standard
Aspect Ratio
Subtitle priority
Subtitile Lang
Close Cuption
CVBS SUB
Audio Output
Audio Level
Audio Mode
Audio Priority
BISS
BISS Mode
→
(Mode 0/1/E)
Decoder-1
Decoder-2
RF Setting
RF Frequency1
RF Frequency2
RF Level
RF Audio Mode-1
RF Audio Mode-2
RF Switch-2
Input Setting
Stream IP 1
Stream IP 2
Uni/Mul 1 Setting
Uni/Mul 2 Setting
6.2.1 Decoder-1/2
1) Program: Display the name of decoded program.
2) Video Output: Configure parameters of video output. It has 6 options as below.
Video Standard: Select the video output format among
“Auto”, ”SECAM”, “NTSC”, and “PAL”.
Aspect Ratio: Select the video display scale among
“4:3 Full”, “16:9 Full”, “4:3 Letterbox”.
Subtitle Priority: Select the subtitle mode between
“DVB First” and “EBU First”.
Subtitle Lang: Select the language of subtitle.
Close Caption: Enable or Disable the function of closed caption by selecting
“OFF” or “ON”.
CVBS Sub: Select the CVBS sub-standard among
“PALBDGHZ”, “PALN”, “ALN-C” and “SECAM”.
3) Audio Output: Configure parameters of audio output. It has 3 options as below.
Audio Level: Configure the audio level, its range is
“0~99”.
Audio Mode: Select the audio mode among
“Stereo”, “Mono”, “Dual”, “Left” and “Right”.
Audio Priority: Configure the audio PID for program
’s source.
4) BISS: Configure parameters of BISS function for deciphering programs.
6.2.2 RF Setting
1) RF Frequency1: Configure the RF frequency for outputting program1.
2) RF Frequency2: Configure the RF frequency for outputting program2.
3) RF Level: Configure RF level.
4) RF Audio Mode-1: Configure audio mode for modulated program-1.
5) RF Audio Mode-2: Configure audio mode for modulated program-2.
6) RF Switch-2: Enable or disable the RF function of modulated program2 by selecting
“ON”
or
“OFF”.
6.2.3 Input Setting
1) Stream IP1: Configure the parameters of IP board1.
