Note
: If a trundle is not used, skip this step.
If a trundle will be used, the position of the mid beam is not at center. The metal
bracket on the headboard/footboard has to be moved and re - attached either on the left or
right, depending where the trundle will be placed.
3.
Remove the metal brackets on headboard (A) and footboard (B) by releasing the bolts on the
metal brackets as shown in fig 3. Re-attach again on desired position by inserting the bolts
through the threaded hole.
4.
Attach the Mid Beam (F) to the headboard (A) and footboard (B) by sliding it onto the metal
bracket as shown in fig 4,illustration 2.
Fig.3
Fig.4 Illustration.2
5.
Lay slat rolls (D) in place over side rails lips and insert the screws (G) into the holes at
the end of the slats (D). Tighten with a screwdriver (Not Included) as shown in fig 3,
illustration 2.
Illustration.3
Fig.3
Care Instructions:
Avoid direct sunlight and excessive temperatures.
Dust often using a clean, soft, dry and lint-free cloth.
Waxing is not recommended on lacquered finish.
Please wipe up all spills immediately.
Thank you for your purchase
stores | catalog | www.pbteen.com
B
