Oxford Simple Bed
Assembly Instructions
Pre-Assembly:
Please read all instructions before beginning assembly.
For your safety and convenience, assembly by two adult is recommended.
Carefully set out and identify all part hardware prior to assembly.
Save all packing materials until assembly is complete to avoid accidentally discarding small
part or hardware.
Parts Enclosed in Box 1:
(1) Headboard (A)
(1) Footboard (B)
Tool Requirement:
Screwdriver (Not Included)
F
D
(G) (H) (I)
A E
C
B
To Assemble Bed:
Note: Please make sure the Headboard (packed in separate carton) is assembled before continue to
the steps below.
1.
Attach the side rails (C) to headboard (A) and footboard (B) by inserting hook ends into the
corresponding slots. Ensure connections are secure as shown in fig 1, illustration 1.
Note:
For Twin & Full Size the units do not have any mid beam, so skip the steps no 2, 3 and 4.
2.
Attach leg supports (E) to the Mid Beam (F) by inserting Allen Bolts (H) through the holes on
the Mid Beam (F) into the inserts in the legs supports (E). Tighten with Allen Key (I) as
shown in fig 2.
Fig.1
Illustration.1
Fig.2
A F
E H
C
B
Parts Enclosed in Box 2:
(2) Side rails (C)
(1) Slat Rolls (D)
(3) Leg supports (E) (Queen Only)
(1) Mid Beam (F)(Queen Only)
Hardware Enclosed in box 2:
Screws (G)
(32) 8 x 1 ¼” (Twin)
(32) 8 x 1 ½” (Full)
(48) 8 x 1 ¼” (Queen)
For Queen Only:
(6) Allen Bolts ¼” x 2” (H)
(1) Allen Key M4 (I)
