3 of 6
www.pbteen.com
Beadboard Small Desk Hutch
Pre-assembly:
․
Please read all instructions before beginning assembly.
․
We recommend assembly by two adults.
․
Save all packing materials until assembly is complete to
avoid accidentally discarding smaller parts or hardware.
Hardware Included:
A – Mending Plate- 2pcs
B – Phillips Head Screws- 8pcs
(70x40mm)
(#6x15mm)
Tools Required:
Phillips Head Screwdriver (not included). Do not use power drill as it may cause cracking.
Assembly Instructions:
7. Place Hutch on a Desk (sold separately); align Hutch and Desk center to center, as shown below. Place
Mending Plate (A) at the back of Hutch and Desk. Insert Phillips Head Screws (B) through pre-drilled holes
in Mending Plate (A) into predrilled holes at the back of the Hutch; screw another 2 Philips Head Screws (B)
through pre-drilled holes in Mending Plate (A) into back side of desk top. Loosely tighten all screws with a
Philips Head Screw Driver. Repeat on the other side of Desk for 2
nd
mending plate. Tighten all screws when
they are all in place.
8. For setting up the Desk, refer to Desk’s Assembly Instruction.
9. Hardware should be checked periodically for tightness.
Care Instructions:
•
Avoid direct sunlight and excessive temperatures.
•
Dust often using a clean, soft, dry and lint-free cloth.
•
Slightly moisten cloth with water. A damp cloth holds dust and prevents scratching.
•
Waxing is not recommended on lacquered finish.
