P a y R a n g e | B l u K e y S e l e c t ™ R e f e r e n c e M a n u a l
6 / 2 9 / 2 0 2 1
P a g e
9 | 21
If card reader is connected to power
separately, keep that connection.
b.
Plug in card reader cable into card
connector on MDB harness
11.
Connect BluKey Select to Machine
MDB connector
12.
Power up the machine (leave the machine door/panel open)
13.
BluKey Select should power up and turn on solid blue LED
Note: Some machines disable payment when service panel is open – BluKey Select will be
blinking red LED. Manually pressing on service panel switch should let BluKey Select turn on
solid blue LED.
See section “Troubleshooting / Light Codes” on page 18 if BluKey Select does not power up or
does not turn on solid blue LED.
14.
Configure BluKey Select
See section “BluKey Select Device Configuration” on page 9.
15.
Power off the machine
16.
Place wires and BluKey Select inside the machine
Position BluKey Select near the control panel.
Tie loose cables with zip-ties.
17.
Close machine door/panel
18.
Power up the machine
19.
Verify machine operation
Check mobile payment, coin payment, keypad vend and touchless vend and verify that
PayRange app shows “Machine in Use” when vending is in progress
20.
Place PayRange stickers on the machine
Place “Pay with PayRange” sticker on the machine front.
Place “PayRange overview” sticker in the room.
BluKey Select Device Configuration
1.
Register BluKey Select device (using website)
Note: This can be prepared off-site, before installation.
a.
Login with your operator account to the Manage website at
