Page
09/07/2009
Parts list
Tools List
Power Drill
Drill bits 3/8”, ”.
Philips screwdriver
Hacksaw for cutting bolts
Hammer / Mallet
Chisel inch
Stanley knife
Adhesive tape
Pencil
Tape measure
8mm spanner (supplied)
2mm Allen key (supplied)
) Front Lock Assembly
2) Rear Lock Assembly
3) Rubber Escutcheon x2
4) Left and Right Handles
5) Battery Pack
6) Tubular Mortice Lock
7) Square Drive Bar
8) 8 mm Conversion Sleeve
9) 2 mm Allen Key
0) 8 mm Spanner
) Strike Plate Backbox
2) Strike Plate
3) Long Mounting Screws x4
4) Short Mounting Screws x4
This unit is for Indoor use only.
Technical Support
Technical help is available: Monday - Friday from 2:00 AM - 5:00 PM (PST)
Saturday from :00 AM - 5:00 AM (PST)
.800.672.PAXT
Ins-30107-US Easyprox nano
Documentation on all Paxton Access products can be found on our web site - http://www.paxton-access.com/
This access control unit uses wireless communication.
It is recommended that a Net2Air site surveyor is used to
determine the best position for the Net2Air bridge and Nano
control units.
This unit requires a Net2Air bridge (USB or Ethernet) to
communicate with the controlling PC running Net2 v4.4 or
later software.
ONLY
Paxton Access
4HIS BATTERY PACK IS TO BE REPLACED
WITH 0AXTON !CCESS PART NUMBER
Paxton Access
4HISBATTERYPACKISTOBE
REPLACEDWITH0AXTON!CCESS
PARTNUMBER
746-003
ONLY
6
4HISBATTERYPACKISTOBE
REPLACEDWITH0AXTON!CCESS
PARTNUMBER
***-***
ONLY
6
Paxton Access
