Paxar Monarch Sierra Sport 2 9460, Руководство оператора

Страница: 28 / 38

4-4 Troubleshooting
Error Description
757
Load Supplies Load supplies (supply length mismatch),
because the calibrated supply length
differs by plus or minus .25 inches from
the format. Press the
A
button under
the x icon to clear the error.
758
Check Supply Either the supply is not seen or the on-
demand sensor is broken. Press the
A
button under the x icon to clear the error.
Check for a label jam, clear the supply
path, or reload supplies. This error may
occur if you remove a label too quickly in
on-demand mode. The printer does not
recalibrate after this error.
762
Low Battery Recharge the battery. Press the
A
button under the x icon to clear the error.
763
Remove Label Waiting to dispense label. Press the
A
button under the x icon to clear the error.
765
Check
Printhead The printhead has less than four bad
dots. The printer can shift bar code
fields to avoid bad dots. Press the
A
button under the x icon to clear the error
and continue printing.
768
Check
Printhead Printhead has more than 10 bad dots or
is not connected. Connect the printhead.
Press the
A
button under the x icon to
clear the error.
791
Error Pending The printer has an error pending. Turn
off the printer. Wait 15 seconds and turn
it back on. Resend the packets.
If you see a System Error Vector ## on the display,
call Technical Support for instructions. If you need to
return the printer to Paxar, use the original packaging
(box and packing material).