PawPail.com
2
CONTENTS
8 ea. M3 (5.5mm) x 10mm screws
8 ea. M3 (5.5mm) hex nuts
1 ea. upper mounting hardware
1 ea. lower mounting hardware
1 ea. PawPail mounting bracket
Remove the basket from inside your PawPail and lay your
PawPail on the ground, with the back of the PawPail facing
you. Identify the 8 pre-formed pilot holes on the back of
your PawPail.
Carefully drill through the PawPail container at each of the
pilot hole sites using a drill with 5/64” (1.98mm) drill bit.
ASSEMBLY
Pilot Holes
