PAW HeatBloC K32 DN 25, Инструкция по установке и эксплуатации

Страница: 19 / 24

5 Scope of delivery [specialist]
2020/03 993x053x-mub-en – V05 19
Position Spare part Item number
1 Thermometer ball valve DN 32, F1¼" x 1¼" int. thread N00245
2 Thermometer handle for ball valve 1" N00248
3 Dial thermometer, red scale, d=50 mm, 0-120 °C N00242
4 Dial thermometer, blue scale, d=50 mm, 0-120 °C N00243
5 Union nut G 2" 2156
6 Gasket 1¼", for threaded connection 2" N00133
7 Pump see following table
8 Insulation for HeatBloC
®
DN 32 N00027
9 Actuator 5 Nm, 230 V, 50 Hz 705001
10 Brass pipe DN 32, 2x 2" ext. thread, 180 mm,
with check valve N00139
Sealing set for mixing valve 41013
Item number heating circuit* Pump Item no. EEI
39053(M)WP6 Wilo Para SC 30/6-43 N00261 < 0.20
39053(M)WH6 Wilo-Stratos PICO 30/1-6 E1239630 < 0.20
39053(M)WY10 Wilo-Yonos PARA HF 30/0.5-10 E12361510 < 0.23
39053(M)GM6 Grundfos UPM3 Auto L 32-70 PP3 N00240 < 0.20
39053(M)GH6 Grundfos Alpha2.1 32-60 N00239 < 0.17
39053(M)GL9 Grundfos UPML 32-95 Auto E121704 < 0.23
*Heating circuits with an actuator additionally contain a M in the item number, f. ex. 39053MWH6
(without actuator = 39053WH6)