3 Product description
2020/03
993x053x-mub-en – V05
11
3.2.4
Accessories: Actuator (optional)
The PAW actuator for weather-compensated control is available as an accessory.
For mixing valves with flow on the left, the scale must be turned by 180°.
for mixing valve with flow on the right
for mixing valve with flow on the left
Assembly of the actuator for mixing valves
with flow on the right:
If the PAW actuator has been purchased as an
optional accessory, the mixing valve contains a
metal plate. To mount the PAW actuator on the
mixing valve, proceed as follows:
1.
Turn the rotary knob of the mixing valve
into position 0 (fig. 4).
2.
Set the actuator to manual mode by turning
the selector switch (fig. 3).
3.
Turn the rotary knob of the actuator to the left
to the position shown on the adjacent figure
(fig. 3).
4.
Mount the rotation lock / the stop bolt in
the left opening of the metal plate (fig. 4).
The actuator is fixed on a stop bolt.
5.
Put the PAW actuator on the rotary knob
of the mixing valve and mount the actuator on
the stop bolt.
The PAW actuator must be mounted in a
horizontal position as shown in figure 5.
6.
Set the actuator to automatic mode.
Stop bolt
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
blue
blue
blue
red
red
selector
switch
