1 General Information
2017/07
99640141x-mub-en - V02
5
1.2
About this product
The domestic hot water module is a premounted group of fittings checked for tightness and
used to transfer the heat between the buffer tank and the domestic hot water circuit. It contains
a preset controller and important fittings for the operation of the system:
•
Ball valves in the primary circuit
•
Piston valves in the secondary circuit
•
Pressure relief valve in the secondary circuit
•
Premounted controller
•
Temperature sensor at the cold water inlet
•
Temperature sensor in the heating circuit flow line
•
Flow meter at the domestic hot water outlet
•
Primary and circulation pump can be isolated
•
Manual vent valve for venting the heat exchanger
and the pump
1.3
Designated use
The domestic hot water module must only be mounted in heating installations between the
buffer tank and the domestic hot water circuit. Due to its design, the station must be mounted
and operated in a vertical position! The technical limit values specified in these instructions must
be observed.
Only use PAW accessories with the domestic hot water module.
Improper usage excludes any liability claims.
The wrapping materials are made of recyclable materials and can be disposed of with
recyclable materials.
