Paula Deen WT-98-1, Инструкция по эксплуатации

Страница: 4 / 8

Blade Assembly
To Assemble Blades:
1. Hold blades by the non-serrated ends with the plastic guards on either side. Make sure that
the serrated edges are on the same side. Slide the rivet of the blade into the keyhole slot on
the other blade.
To Assemble Blades into Power Handle:
1. Make sure the knife is unplugged. Hold the assembled blades by the plastic guard in one
hand (serrated edges facing down) and the motor unit in the other hand with the power
button in the uppermost position.
2. Carefully insert the blades (serrated edges facing down) into the slot on the power handle
with buttons facing upwards and push gently until they click securely.
To Disassemble Blades from Power Handle:
1. Unplug the knife.
2. Holding the plastic guards, press the blade release button on the power handle body.
3. Pull blades away from the power handle body.
4. Separate the blades by sliding the rivets from one blade out of the keyhole slot of the
other blade.
Before First Use
1. Remove all packaging materials.
2. Clean the blades with dishwashing liquid, and a non-abrasive sponge. Use caution as the
blades will be extremely sharp.
3. Wipe the inside and outside of the appliance with a cloth.
Using the Appliance
1. Plug into power outlet.
2. Ensure that the product to be carved is secure, for example, by using a carving fork.
3. Press and hold down the on/off switch.
4. Guide the blades through the food ensuring body parts, clothing and utensils are away from
the moving blades. It is not necessary to use a sawing motion or excessive pressure.
5. To stop the blades, release the on/off button.
NOTE: Your electric knife is designed to cut through "ready to roast" joints, but can also
be used to cut thick bread, cheese and meats with ease. If the blade release button is
accidentally pushed during operation, the blades will disengage. As a result, the knife may
stall or will not cut properly. Be sure to position your hand behind the blade release button
during operation.