Paul Wegener DS1/420, Руководство по эксплуатации, Страница: 5 / 8

EU-DECLARATION OF CONFORMITY
For the following product:
Pressure transducer DS1/420
is herewith confirmed that this one complies with following EU directives:
EMC directive 2014/30/EU
Ex-protection directive ATEX 2014/34/EU
And developed and examined based on following standards:
EN 61000-6-3:2011-09 subject basic standard for emitted interference – emitted interference
for living quarters, business- and trade as well as small firms
EN 61000-6-2:2011-06
subject standard for interference resistance– industrial sector
EN 60079-0:2014-06
electrical equipment for explosion-hazard areas,
section 0: general requirements
EN 60079-15:2011-02 electrical equipment for explosion-hazard areas, section 15: construction,
test and marking of electrical equipment of ignition protection type „n“
Marking as category 3 - equipment for use in explosion-hazard areas of the zone 2:
II3G Ex nA IIB T4 X
-20 °C ≤ Ta ≤ +60 °C
Manufacturer: Paul Wegener GmbH
Marienstraße 24
D-06493 Ballenstedt
Tel.: +49(0)39483 96 300
Fax.: +49(0)39483 96 400
Internet: www.paul-wegener.de
e-mail: info@paul-wegener.de
The safety advice of the product documentation must be followed!
Ballenstedt, 20.04.2016
Wegener
Managing Director
5
Operating manual of data acquisition system PWBlogg