3
When moving the system from one environment to another where condensa-
tion can occur due to temperature changes, do not operate or charge until all
condensation has fully evaporated. If any components become immersed in
water for any reason, DO NOT operate or charge the system. Discard the battery
properly and contact our Customer Service team.
WARNING! Do not insert any foreign objects into any outlets or ventilation holes.
Do not
carry or store the system together with necklaces, hair pins, nails, paper clips,
or any other small metal objects.
WARNING! Do not use ungrounded power cords, power outlets or power strips.
Always
use three-prong, grounded power cords and extension cords when connect-
ing flash units / power packs to the system. Do not use power strips or outlet
adapters that defeat the third prong.
WARNING! The Vagabond Mini™ Lithium contains no user-serviceable parts.
Never
open, disassemble, or attempt to repair any system components. Only qualified
technicians should disassemble and service the system’s internal components
as incorrect disassembly can create an electric shock hazard. Fingers and other
foreign objects must never be inserted or dropped inside any of the outlets. If
the system or any internal component has been dropped or damaged, discon-
tinue use and contact our Customer Service team. Likewise, do not attempt to
make any changes or modifications to your system. Changes and/or modifica-
tions made, outside of those performed or approved by Paul C. Buff, Inc.™, may
present hazardous conditions and void the warranty.
WARNING! Do not put a continuous load higher than 120 Watts on the inverter.
Doing
so may cause the unit to overheat and shut down. Also note that attempting to
operate a continuous load under 120 watts in conjunction with operating flash
units will degrade the ability to recycle the flash units.
WARNING! Do not connect 120V flash units to a 230V Vagabond Mini™ Lithium system or
230V flash units to a 120V Vagabond Mini™ Lithium system.
Do not use adapters to
connect flash units of incompatible voltage as this can damage the flash units
and/or the inverter.
WARNING! Do not use Paul C. Buff™ equipment without permission in restricted areas.
Do not violently shake any system components or subject the system to severe vibration.
Should any component be dropped, stepped on, or crushed, causing enough
damage to crack the housing, discontinue use immediately and contact our
Customer Service team.
Do not attempt to operate flash units or flash heads / power packs with the modeling
lamps turned on.
The system is not designed to operate modeling lamps continu-
ously as this would deplete the battery rapidly, cause slow recycle times and
could overheat the system’s inverter.
WARNING! Do not use the Vagabond Mini™ Lithium system to power medical devices.
continued on the following page...
