Paul B. Zimmerman DS-15, Руководство пользователя

Страница: 17 / 24

17
Installing the Sprayer
1. Select a mounting surface for the base unit. Mount the tank on the truck in a location that can withstand the weight of the base
unit with a full tank (approximately 250 lbs).
2. The location of the tank should not cause interference with the operation of the equipment it is mounted on.
3. For optimal stability, mount the liquid applicator with bolts using the six threaded holes in the bottom of the tank.
14”
11 1/8”
5/16
Figure 3: Applicator Unit Mounting
Figure 4: Bottom Hole Dimensions (DS-25)
Base Unit Installation (DS-15 & DS-25)
Qty. Description
1 Assembled Base Unit
1 Parts bag with filter assembly components
Base Unit Box Contains:
•
NOTE: Measure the distance between the bottom mounting holes because tank measurements can vary up to 1/4”.
•
Attach the tank to the desired mounting surface using 5/16-18 bolts.
•
IMPORTANT: Make sure that the bolts do not extend more than 1/2” into the tank. Use the shortest bolts possible and spacing
washers as needed to ensure that excess bolt length does not puncture the tank. Do not over-tighten bolts.
6 15/16”
19 3/4”
14”
11 1/8”
5/16
Figure 5: Bottom Hole Dimensions (DS-15)